Motor Specifications
Model: XERUN 4274SD KV2200 Sensored Brushless Motor
Rotational Speed: 2200 KV
Motor Dimensions (Diameter x Length): 40mm x 74mm
Shaft Dimensions (Diameter x Length): 5mm x 18.5mm
Input Battery Types: NiCd/ Nimh/ Li-po Battery
Recommend Model: RC Model 1/8 Car

Motor Features
- High efficiency (>90%)
- New design with lighter weight but bigger torque
- Higher power than the competition, faster acceleration and highter top speed
- NMB precision ball bearings ensure longer life
- Neodymium agnets ensure high power output


ESC Specification
Model: XERUN-150A
Dimension: 58mm(L) x 46.5mm(W) x 35mm(H)
Cont. / Burst Current: 150A / 950A
Resistance: 0.0002 ohm
Suitable Motor: Sensored and sensorless brushless motors
=>4.5T, KV<=3000 (Works with 4S Li-Po), =>6T, KV<=2400 (Works with 6S Li-Po)
Battery: 6-18 cells NiMH or 2-6 cells Li-Po
BEC Output: 5.75V/3A Switch mode built-in BEC
Cooling Fan Working Voltage: 5V, max. 8V (The fan gets the power supply from the built-in BEC)
Suitable Model: 1/5, 1/8 on-road, off-road, monster, Super powerful applications

ESC Features
Compatible with all sensorless brushless motors and most of sensored brushless motors such as LRP, SpeedPassion, Novak, Etc.

Seamlessly change to sensorless working mode when the sensor cable is broken.

Excellent start-up, acceleration and linearity features.

Built-in switch mode BEC has a powerful output to supply all the electronic equipments.

Firmware can be updated through an USB adapter on the advanced LCD Program Box (Optional equipment).

User programmable. Easily programmed with the "SET" button on the ESC and also compatible with the digital LEDs Program Card and the advanced professional LCD Program Box.

3 running modes (Forward mode, Forward/Reverse mode, Rock Crawler mode).

4 steps of maximum reverse force adjustment.

Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.

9 start modes (Also called "Punch") from "very soft (Level 1)" to "very aggressive (Level 9)".

8 steps of timing adjustment to suitable for all brushless motors.

Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection.

Splash proof and dustproof.


Program Card Specifications
Dimensions 90mm x 51mm x 17mm
Power Supply DC 4.5V to 6.0V
Suitable ESC HOBBYWING / TEKMODEL

Program Card Features and Functions
The 2 IN 1 PROFESSIONAL PROGRAM BOX is a small device to set the programmable parameters of the brushless ESC, it works in the following 2 ways: