Dimension: 58mm(L) x 46.5mm(W) x 35mm(H)
Cont. / Burst Current: 150A / 950A
Resistance: 0.0002 ohm
Suitable Motor: Sensored and sensorless brushless motors
=>4.5T, KV<=3000 (Works with 4S Li-Po), =>6T, KV<=2400 (Works with 6S Li-Po)
Battery: 6-18 cells NiMH or 2-6 cells Li-Po
BEC Output: 5.75V/3A Switch mode built-in BEC
Cooling Fan Working Voltage: 5V, max. 8V (The fan gets the power supply from the built-in BEC)
Suitable Model: 1/5, 1/8 on-road, off-road, monster, Super powerful applications
Compatible with all sensorless brushless motors and most of sensored brushless motors such as LRP, SpeedPassion, Novak, Etc.
Seamlessly change to sensorless working mode when the sensor cable is broken.
Excellent start-up, acceleration and linearity features.
Built-in switch mode BEC has a powerful output to supply all the electronic equipments.
Firmware can be updated through an USB adapter on the advanced LCD Program Box (Optional equipment).
User programmable. Easily programmed with the "SET" button on the ESC and also compatible with the digital LEDs Program Card and the advanced professional LCD Program Box.
3 running modes (Forward mode, Forward/Reverse mode, Rock Crawler mode).
4 steps of maximum reverse force adjustment.
Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
9 start modes (Also called "Punch") from "very soft (Level 1)" to "very aggressive (Level 9)".
8 steps of timing adjustment to suitable for all brushless motors.
Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
Compatible with traditional mechanical disc-brake system.
Splash proof and dustproof.
LCD 2 in 1 Program Card Specification
Dimensions 90mm x 51mm x 17mm
Power Supply DC 4.5V to 6.0V
Suitable ESC HOBBYWING / TEKMODEL
Features and Functions
The 2 IN 1 PROFESSIONAL PROGRAM BOX is a small device to set the programmable parameters of the brushless ESC, it works in the following 2 ways:
1. Working as an individual device to set the ESC, the value of each parameter is displayed on its own LCD screen.
2. Working as an USD adapter to link the ESC with a PC, and the user can update the firmware of the ESC or set the ESC by the special application software on PC.
The programmable item for the CAR ESC are:
1. Running Mode
2. Drag Brake Force
3. Low Voltage Cut-Off Threshold
4. Start Mode
5. Maximum Brake Force
6. Maximum Reverse Force
7. Initial Brake Force
8. Throttle Neutral Range
10. Over-Heat Protection
11. Motor Rotation
12. Lipo Cells
The programmable item for the AIRCRAFT AND HELICOPTER ESC are:
1. Brake Setting
2. Battery Type
3. Low Voltage Protection Mode
4. Low Voltage Protection Threshold
5. Start Mode
7. Governor Mode
8. Motor Type
9. PWM Frequency
10. Built-In BEC Output
11. Motor Load
12. Lipo Cells