Model: XERUN KV2000 Brushless Motor
Motor Dimension (Dismeter x Length): 42mm x 74mm
Shaft Dimension: (Diameter x Length): 5mm x 19mm
Rotation Speed: 2000KV
Dimension: 59.3mm(L) x 38.4mm(W) x 33.6mm(H)
Cont. / Burst Current: 120A / 760A
Resistance: 0.0004 ohm
1/10 SCT / Truggy / Buggy / Monster
1/8 SCT / Buggy (Includes TRAXXAS 1/10 Truggy and Buggy)
Suitable Motor: Sensorless Brushless Motors
Suitable Motor Turns:
2S Lipo: KV<=6000, 3S Lipo: KV<=4000, 4S Lipo: KV<=3000
Battery: 6-12 cells Ni-xx (NiMH / NiCd) or 2-4 cells (Li-Po)
BEC Output: 6V/3A (Switching mode built-in BEC)
Net Weight: 113g (with 12AWG 200mm *5 wires)
Completely water-proof and dust-proof. The ESC works properly even under water.
(Please remove the cooling fan when running car in water, and after running, please make the ESC clean and then dry it to avoid the oxidation of copper connectors)
Excellent start-up, acceleration and linearity features, suitable for truggy (especially short course trucks) and buggy.
The built-in switching mode BEC of EZRUN-SC8 ESC has a powerful output to supply all electronic equipments even with 4S Lipo Input.
Integrated and compact design, very suitable for trucks (especially short course trucks) and buggies.
There is a mounting stand for installing the ESC on chassis easily and firmly.
Proportional ABS brake function with 5 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment. Also compatible with the mechanical disc-brake system.
Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
Easily program with the SET button of the ESC, and also compatible with Pocket-sized Program Card (Optional Equipment) and the advanced LCD Program Box (Optional Equipment).
Special program port for connecting to the LED Program Card or the LCD Program Box. User needn`t unplug the Rx lead from receiver when programming the ESC.
Program Card Specification
Dimension (Length x Width x Height): 88mm x 58mm x 14mm
Program Card Features
- Running Mode
- Drag Brake Force
- Low Voltage Cut-Off Threshold
- Start Mode
- Maximum Brake Force
- Maximum Reverse Force
- Initial Brake Force
- Throttle Neutral Range
- Over-Heat Protection
- Motor Rotation
- Lipo Cells